Elreg supplies a complete line of 39MT replacement starters that have a rotatable housing so that fewer skews will provide you with a broader line of coverage. That means you need to carry less inventory to service your customers. Whether you require 12 or 24 volt, 11 or 12 tooth small or large pinions they … Continue reading 39MT Replacement Starter with Rotatable Housing
Engine Oil to Alternator – The engine must be capable of supplying up to 2.0 GPM to the alternator. The alternator requires oil at the rate of 2.0 GPM at high speeds and 0.5 GPM during short idle periods, for proper cooling. A #5 line (¼ inch ID) or larger is recommended. The oil should … Continue reading Delco 50DN Alternator Is Dependent Upon Proper Oil Flow
If you want to ensure that your starter lasts for many years you need to ensure that it is getting the power it needs to start your engine. The first thing to check is the battery(s) – make sure that they are in good condition and fully charged. Then make sure that your alternator is … Continue reading Low Battery Voltage Can Destroy Your Starter
These new AVI160T are T-Mount Alternators that replace Ford 3G, 4G, and 6G alternators. They have dual internal fans, pack 230 Amps at 12/14 volts and are temperature rated at 125⁰C. They are E-Coat Corrosion resistant and by-directional. The AVI160T2002-2 fits Ford diesel and gas engines for F-Series, E-Series, 250, 350, Excursion, Explorer, Ranger, Ambulance, … Continue reading Prestolite Leece-Neville AVI160 Ford Replacement Alternators
Alternators are designed to maintain a batteries charge while supplying the vehicle with sufficient power to run all of the various electrical accessories. Alternators are NOT designed to recharge completely discharged batteries. Before installing a new alternator the battery(s) should be tested and fully charged with a “Battery Charger”. Ensuring that your battery(s) are healthy … Continue reading Alternators Are NOT Battery Chargers
Delco Remy has developed a new drive-end frame and seal kit to modify all belt driven 50DN alternators. Elreg is pleased to make this upgrade available to all of their customers. Part number 10524488 is the complete kit which includes the drive-end frame and seal assembly.
Elreg’s T1 alternators are manufactured using Huco regulators and rectifiers. These two parts supplied by this OEM German manufacturer ensure that the electronics will not fail and that the alternator will continue to perform in the toughest environment. Did you know that these Huco parts come with a 5-year warranty? Not even Bosch offers this kind of warranty!